Educational tender items for schools in Malaysia
"AVAILABLE ISI STUDENT MICROSCOPE FOR NCERT KITS (UPSKL, SSK, SSLK BIOLOGY)"

Scientific Lab Equipments Manufacturer Exporter India
Lab Equipments Manufacturer Exporter India

Engineering Equipments» Theory of Machines and Tribology Lab Equipments

[1]
 
UNIVERSAL VIBRATION APPARATUS
Click to Enlarge
UNIVERSAL VIBRATION APPARATUS


A comprehensive unit to perform the vibration experiments.Three different modules are provided upon which three batches can work simultaneously. Work of assembly & dismantling is reduced to much extent, which is its distinct advantage over conventional common frame type units.

Experiments-
Module I
1. Simple pendulum.
2. Compound pendulum
3. radius of gyration of bi-filar suspension.
4. Tri-filar suspension.

Module II
1. undamped torsional vibrations of single rotor system.
2. Damped torsional vibrations of single rotor system.
3. Undamped torsional vibrations of double rotor system.

Module III
1. free vibrations of helical coiled spring.
2. free vibrations of spring mass system.
3. forced damped vibrations of a spring mass system.
4. Lateral vibrations of simply supported beam.
5. Verification of Dunkerleys rule.


See Enlarge



CAM ANALYSIS APPARATUS
Click to Enlarge
CAM ANALYSIS APPARATUS


To study the cam profiles and performance of cam & follower system. A cam shaft supported by ball bearing upon which three different types of cam can be mounted. A push rod for follower is supported vertically. A variable speed motor rotates the cam. A dial gauge permits plotting of follower displacement with respect of cam position. Jump speed & effect of weight & spring force on jump speed can be studied.

See Enlarge



WHIRLING OF SHAFTS DEMONSTRATOR
Click to Enlarge
WHIRLING OF SHAFTS DEMONSTRATOR


A base upon which bearing holders and driving motors are coupled.Different bearing can be fitted in a bearing holder to provide different end conditions for test shafts. A variac controls speed of driving motor. The unit demonstrates the phenomenon of whirling of shaft with single rotor. No necessity of applying pretension to shaft. Thus giving a stress free shaft , where equations of deflection can be applied without doubt . Because of single rotor system good results comparable with theory. Demonstration of true running of shafts after passing the critical (whirling ) speed.

See Enlarge



STATIC AND DYNAMIC BALANCING DEMONSTRATOR
Click to Enlarge
STATIC AND DYNAMIC BALANCING DEMONSTRATOR


A unit consists of a precision ground shaft rotating freely in ball bearings. Four slotted discs mounted over it. Known weights can attached in the slot of disc at required radial distance. Disc can adjusted at different position along the length of shaft and also disc can be fixed at any angular position over the shaft. Total flexibility for fixing the weight to the disc Thus a system with known unbalance can be balanced by four plane method, statically and dynamically.

See Enlarge



MOTORISED GYROSCOPE
Click to Enlarge
MOTORISED GYROSCOPE


To study applied torque equals to gyroscopic couple, the unit consists of a heavy rotor mounted in bearings and driven by variable speed motor. By putting weights on weight platform, torque is applied to rotor. Rotor can move about three axes. Thus the relation, T= I.. w . w p can be studied.

See Enlarge



JOURNAL BEARING APPARATUS. ( WITH PRESSURE GAUGE ARRANGEMENT)
Click to Enlarge
JOURNAL BEARING APPARATUS. ( WITH PRESSURE GAUGE ARRANGEMENT)


Determination of boundary lubrication, load bearing capacity, pressure distribution, friction and Sommerfeld Number. A unit consists a motor driven journal shaft, mounted in supporting bearings over which test bearing floats. Oil supplied to bearing by gravity speed from oil tank. Motor provided with speed control. Pressure gauge connected to a tapping over the bearing. Tapping can be rotated to required angular position around the journal axis, pressure distribution around the bearing can be noted. A torque arm and weights provided enable to measure the friction torque. Due to rotating pressure gauge, high pressure can measured avoiding overflow and air bubble problem of conventional oil manometer type unit, an accurate determination of graph of coefficient of friction Vs Sommer feld number is possible , which is useful to decide to whether the bearing is bearing is operating in boundary lubrication or oil film lubrication. Vary small radial clearance of 0.1 mm enables to use the theory without doubt, because at large clearance, theory cannot be accurately applied.

See Enlarge



GOVERNOR APPARATUS
Click to Enlarge
GOVERNOR APPARATUS


To calculate characteristics of each governor at different speed and compare their performance. viz sensitiveness, stability , governor efforts.Unit consists a main spindle driven by variable speed motor. Three different governor assemblies can be mounted over the spindle. A scale with pointer measures the lift of the governor.

See Enlarge



CORIOLLIS COMPONENT OF ACCELERATION APPARATUS
Click to Enlarge
CORIOLLIS COMPONENT OF ACCELERATION APPARATUS


To determine coriollis component of acceleration, the unit uses hydraulic analogy to represent the rotating slider. It consists a rotating block to which attached are two pipes,diametrically opposite. Water flowing through pipe represents rotating slider. The rotating block is rotated by a variable speed motor. The torque given by motor is proportional to coriollis component of acceleration, which is measured by torque arm and spring balance. Water is circulated through the system by a small pump.

See Enlarge



MICHELL TILTING PAD BEARING APPARATUS
Click to Enlarge
MICHELL TILTING PAD BEARING APPARATUS


The unit consists a pad which can be fitted to required angle. Endless belt, which moves beneath the pad,carries the oil over its surface from oil bath, when pad tilted over the oil film, pressure is developed. The pad is provided with pressure tappings parallel and perpendicular to belt direction. Pressure distribution measured over a multitude manometer.belt is driven by variable speed motor, tilting angle and minimum gap between pad and belt can be adjusted and characteristics can be studied at various gaps,inclination and relative surface speed.TILTING PAD- circular, square & trapezoidal shapes one each.

See Enlarge



EPICYCLIC GEAR TRAIN AND HOLDING TORQUE APPARATUS
Click to Enlarge
EPICYCLIC GEAR TRAIN AND HOLDING TORQUE APPARATUS


The gear train consists of an internal gear, planet gears and sun gear. Train is driven by motor giving maximum input torque. Planet carrier carries the planet gears. Internal gears mounted over a flange which rotates the bearing, a pulley mounted over a output shaft of internal gear. Spring balance measures torque for both the internal gear and planet carrier. Either or them can be held stationery and holding torque required for stationery member and out put torque for the other member can be measured. A three channel digital rpm indicator at extra cost. For angular velocities . digital torque indicator for motor output torque ,at extra cost.

See Enlarge




[1]


 
 

Related Category

 

Heat Transfer Laboratory Equipments

Refrigeration and Air Conditioning Lab Equipments

Aerodynamics Turbomachinery Lab Equipments

Structural Laboratory Equipments

Production Engineering Equipments

Hydraulics Laboratory Equipments

Transfusion and Dialysis Equipments

Environmental Field Equipment

   

Search

Our Product Range

View All Products...

© International Biological Laboratories 2011-2012. All Rights Reserved.

Theory of Machines and Tribology Lab Equipments Manufacturer,Theory of Machines and Tribology Lab Equipments Exporter,Theory of Machines and Tribology Lab Equipments Supplier,Theory of Machines and Tribology Lab Equipments India