Educational tender items for schools in Malaysia
"AVAILABLE ISI STUDENT MICROSCOPE FOR NCERT KITS (UPSKL, SSK, SSLK BIOLOGY)"

Scientific Lab Equipments Manufacturer Exporter India
Lab Equipments Manufacturer Exporter India

Engineering Equipments» Hydraulics Laboratory Equipments

[1] 2 [ Next»]
 
REYNOULDS APPARATUS
Click to Enlarge
REYNOULDS APPARATUS


To demonstrate the principal of laminar and turbulent flow and determination of reynoulds number for various flow rates. A water supply tank to which a glass tube is connected and enters at the center of glass tube cross section. For laminar flow condition, stick is clearly viable but in turbulent flow, the die line diffuse, controlled by valves and gives clear visualization.

See Enlarge



VERIFICATION OF BERNOULLIES THEOREM APPARATUS
Click to Enlarge
VERIFICATION OF BERNOULLIES THEOREM APPARATUS


To calculate the energy & head of water at different saction, A unit consists of a transparent flow channel through which water is made to flow. The velocity of water changes as cross sectional area of channel changes. Changes of head are measured with manometric tubes connected at various tapping to the channel.

See Enlarge



FLOW OVER NOTCHES APPARATUS
Click to Enlarge
FLOW OVER NOTCHES APPARATUS


A flow channel in which notch fitted. Water is supplied at one end of channel, which flows over the notch. A setting chamber with dampers is provided at beginning of flow channel to reduce the pulsations and to settle the flow.arrangement is provided to measure the sill level of water & flow level to determine the head.

See Enlarge



FLOW OVER WEIR APPARATUS
Click to Enlarge
FLOW OVER WEIR APPARATUS


A flow channel in which weir fitted. Water is supplied at one end of channel, which flows over the weir. A setting chamber with dampers is provided at beginning of flow channel to reduce the pulsations and to settle the flow. arrangement is provided to measure the sill level of water & flow level to determine the head.

See Enlarge



FLOW THROUGH ORIFICE & MOUTHPIECE
Click to Enlarge
FLOW THROUGH ORIFICE & MOUTHPIECE


To determine Cd, Cc, & Cv, of orifice as well as Cd of mouthpiece. A supply tank to which orifice or mouthpiece fitted. Tank with flow settling arrangement. A tracer pointer to demonstrate & determine x-y Co-ordinates of jet. Arrangement is provided to vary and measure the head over orifice or mouthpiece.

See Enlarge



FLOW MEASUREMENT BY VENTURIMETER AND ORIFICEMETER
Click to Enlarge
FLOW MEASUREMENT BY VENTURIMETER AND ORIFICEMETER


A unit consists a supply piping connected to a transparent venturi and orifice. tappings to measure pressure difference across venturi and orifice which are connected to differential manometer. The actual flow rate can be measured with the help of measuring tank and both the meters can be calibrated.

See Enlarge



LOSSES IN PIPE FITTINGS
Click to Enlarge
LOSSES IN PIPE FITTINGS


To study of loss of head in various pipe fittings, the apparatus consists of a piping providing with a various fittings. A differential manometer supplied to measure the loss of head in these fitting. A flow control valve is provided which enables experimentation at various flow rates. Sufficient settling length for accurate readings.

See Enlarge



LOSSES IN PIPE FRICTION
Click to Enlarge
LOSSES IN PIPE FRICTION


To study the effect of velocity over the head loss. A unit consists of G.I. pipes of same length but two different diameters and one pipe are copper and aluminium each. Piezometric tubes to measure the head at tappings to compare the head losses for various material and pipe diameters.

See Enlarge



CENTRIFUGAL PUMP TEST RIG
Click to Enlarge
CENTRIFUGAL PUMP TEST RIG


CONSTANT SPEED – Centrifugal pump, provided with three phase motor, vacuum gauge at suction and pressure gauge on discharge pipe, gate valve at discharge, which facilities estimation of pump performance at various discharge heads. AC MOTOR & PULLEY TYPE – As per constant speed type, only pump is provided with a three speed pulley, gate valve at discharge to vary the head. DC MOTOR VARIABLE SPEED —As per constant speed type, only pump is provided with a variable speed drive and gate value at discharge to vary the speed.

See Enlarge



MULTISTAGE CENTRIFUGAL PUMP TEST RIG
Click to Enlarge
MULTISTAGE CENTRIFUGAL PUMP TEST RIG


Two stage centrifugal pump provided with three phase motor, vacuum gauge at suction & pressure gauge on discharge pipe, pump is a monoblock (I S I Kirloskar) provided with gate valve at discharge which facilities estimation of pump performance at various discharge heads.

See Enlarge



CENTRIFUGAL PUMPS IN SERIES & PARALLEL APPARATUS
Click to Enlarge
CENTRIFUGAL PUMPS IN SERIES & PARALLEL APPARATUS


To study characteristics of pumps in individual or combined operation required head or discharge cannot be obtained by a single pump, two or more pumps are connected is series or parallel, multistage pump in series connection of two pumps which give same discharge at higher head while pumps operating in parallel give higher discharge at same head.

See Enlarge



RECIPROCATING PUMP TEST RIG
Click to Enlarge
RECIPROCATING PUMP TEST RIG


A recirculating type unit with reciprocating pump and vacuum gauge & pressure gauge at discharge by measuring input to motor and output of pump performance can be estimated at three different speed by using pulley

See Enlarge



RECIPROCATING PUMP TEST RIG [DC MOTOR WITH DIMMER CONTROL
Click to Enlarge
RECIPROCATING PUMP TEST RIG [DC MOTOR WITH DIMMER CONTROL


A recirculating type unit with reciprocating pump & vacuum gauge & pressure gauge at discharge, by measuring input to motor & output to pump performance can be estimated at different speed by means of one at different heads using dimmerstate.

See Enlarge



GEAR PUMP TEST RIG
Click to Enlarge
GEAR PUMP TEST RIG


To determine characteristics – Speed Vs Discharge, Head Vs Discharge, Discharge Vs Input Power, Discharge Vs efficiency. A recirculating type unit. All the measurements are provided to evaluate the performance of gear pump.

See Enlarge



PELTON WHEEL TURBINE TEST RIG - 1.3 HP (1 Kw) Cap.
Click to Enlarge
PELTON WHEEL TURBINE TEST RIG - 1.3 HP (1 Kw) Cap.


To, visualise the operation & estimate B. H. P. & W. H. P. and various efficiencies of pelton turbine. Pelton wheel connected to a rope brake. Water supplied by centrifugal pump & flow measured by venturimenter & mercury manometer. Water jet is directed over the buckets by a nozzle & a spare operating inside the nozzle controls the water flow.

See Enlarge




[1] 2 [ Next»]


 
 

Related Category

 

Theory of Machines and Tribology Lab Equipments

Structural Laboratory Equipments

Transfusion and Dialysis Equipments

Refrigeration and Air Conditioning Lab Equipments

Environmental Field Equipment

Production Engineering Equipments

Heat Transfer Laboratory Equipments

Aerodynamics Turbomachinery Lab Equipments

   

Search

Our Product Range

View All Products...

© International Biological Laboratories 2011-2012. All Rights Reserved.

Hydraulics Laboratory Equipments Manufacturer,Hydraulics Laboratory Equipments Exporter,Hydraulics Laboratory Equipments Supplier,Hydraulics Laboratory Equipments India